Rate Sorted
A tile cutter and tile spacers on a bathroom floor beside the bath. Generated image.

Tiling calculator for tilers

62 tilesto order for a 10 m² wall in 300 x 600 tiles, with 10% added, and £229 of labour on a typical tiler day

Tiles to order and the labour to charge, from one set of measurements.

Work out my tiles

How many tiles, and what to charge to lay them

  1. Type the width and height of the wall or floor.
  2. Pick the tile size and the layout.
  3. Read your tiles and labour above the boxes.

62 tiles

To buy for 10 m², with 10% added for cuts and breakages: 11 m².

£229 of labour, about 1 day, at £22.90 per m².

Sample wall of 4 m by 2.5 m until you type your own.

Labour only, so price the tiles, adhesive and grout on top.

Work out the grout for this wall

The day rate is the typical tiler rate until you type your own.

The area
m
m
m²
Tile size, in mm

5.56 tiles to the m².

Layout
Your labour
£
m²

Published output for straight laid wall tiles: 8 to 12 m² a day, lower for mosaic or complex patterns.

Your answer is worked out as you type and shown above the boxes.

Tiles counted, now the price. The £39 Tiler Rate Book prices every job, writes the quote and the invoice, and sets the tax aside.Get My Rate Book

The 10 m² wall, tile by tile

Every 300 x 600 tile to order, with the 10% allowance hatched.

56 tiles cover the 10 m² wall6 more are the 10% for cuts and breakages62 tiles to order in all
A tiler on a dust sheet in a stripped bathroom cuts a large grey porcelain tile on a wet saw. Generated image.
Cuts at the edges and around fittings are where the 10% goes.

Tiles to order for 10 m², by tile size

Each bar is the whole tiles to order for a 10 m² wall, straight lay, with 10% added.

A kitchen wall half tiled in white brick bond with a spacer in every joint. Generated image.
Brick bond like this cuts more tiles, so allow up to 15%.

Then put it in a quote

Carry the labour into a priced quote, with the tiles and adhesive as lines of their own.

Quote writer
Wall10 m²
Tiles to order62
Labour£229
Sample figures, tiler

Tile quantity questions

How do I work out how many tiles I need?

Multiply width by height for the area, take off doors and windows, then add 10% for cuts and breakages.

Divide by the area of one tile and round up.

How much extra tile should I order?

Topps Tiles says to allow an extra 10% for breakages, cuts and wastage.

For brick bond it advises 10 to 15%.

How many 300 x 600 tiles cover 10 m²?

62 tiles, with 10% added.

In brick bond at 15%, 64.

How many tiles are in a square metre?

It depends on the size.

150 x 150 is 44.44, 100 x 200 is 50, 200 x 200 is 25, 200 x 250 is 20, 300 x 600 is 5.56, 600 x 600 is 2.78.

What should a tiler charge per m²?

On a typical £229 day and 8 to 12 m² of wall tiles, £19.08 to £28.63 per m², labour only.

Does the labour price include the tiles?

No.

It is labour only, so add the tiles, adhesive and grout on top.

Where the figures come from

Wastage and tile sizes, read 9 November 2026: Topps Tiles

Output a day: RenoCalc UK labour rates 2026.

Typical tiler day rate: our modelled rate, checked against five UK directories.

The starting output is the middle of the published range, not a published figure.